| |
|
 |
Links |
|
|
|
|
|
|
| |
|
| |
|
| |
 |
| | Bearing Products >> Thrust cylindrical roller bear >> Thrust cylindrical roller bearings
|
|
|
|
|
|
|
☆ product features
By the washer-shaped raceway circle (axis circle seat) and cylindrical roller and cage components. Cylindrical roller using convex processing, the roller between the pavement and rolling pressure distribution.
Bearing this type of structure for the separation can be installed on each axis lap, seat, roll-components, installation does not allow axis of the shell and a tilt axis.
The kinds of bearings for use in low-speed, affordable one-way axial load and can not limit the radial displacement. Axial load capacity of large axial rigidity is also strong.
★ product categories
One-way thrust cylindrical roller bearings
Two-way thrust cylindrical roller bearings
Mid-size range
Diameter size range: 30mm ~ 1180mm
Outside diameter size range: 52mm ~ 1400mm
Size range width: 16mm ~ 100mm
● Tolerance
ZWZ thrust cylindrical roller bearings GB307.4 tolerance by the Executive. ZWZ provide P0, P6, P5-class products.
◇ Cage
ZWZ thrust cylindrical roller bearings used-car entities brass cage.
When the bearings D ≤ 500mm diameter, using brass entity Cage, Cage did not sign the code behind; bearing when the outer diameter D> 500mm, using a steel cage entity, the post-Cage did not sign the code, and the remaining signs The corresponding post code.
◆ equivalent dynamic load
P = Fa
□ equivalent static load
P0 = Fa |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| | |
|
|
|
| |
|
|
|
Bearing Products
